Coccolle Velio Bedienungsanleitung Seite 6

EN
Electric baby swing Coccolle Velio
Please read these instructions and keep them for future reference!
Warranty conditions
1. The warranty does not cover:
• Damage occurred for reasons attributable to the user.
• Damage occurred as a result of failure to use the product according to
recommendations, warnings and restrictions found in the user manual and on
product elements.
• Consumables subject to natural wear and tear during normal usage such as:
tyres, inner tubes, tread, materials used on handles, structure and colour of
fabrics and materials subject to friction, sleeves in wheels, axels, prints.
• Damage occurred as a result of failure to observe maintenance guidelines
such as: corrosion, changed upholstery or plastic elements colour as a result of
prolonged exposure to sunlight, damage to plastic elements of upholstery as a
result of prolonged exposure to sunlight or excessive temperatures, excessive
play, squeaking / creaking noises, damage to mechanism due to over-load.
• Damage occurred due to repairs being carried out by unauthorised personnel.
• Single wheels being pushed into a vertical position as a result of loading (this
is normal).
• Damage and soiling occurred due to the product being incorrectly packaged for
shipping (courier online purchases).
2. The repair method is determined by the manufacturer/warranty service
provider.
3. The product subject to a complaint should be provided clean.
4. The consumer goods warranty does not exclude or suspend the purchaser's
rights stemming from goods noncompliance with the agreement.
Part's list
A. Left Seat Frame
B. Right Seat Frame
C. Seat Cover
D. Toy Bar
E. Left Driving Part Group
F. Right Driving Part Group
G. Foot Stand
H. Power Adapter
I. Screw*4pcs
Assembly
1. As the picture shows, take out the left and right driving part groups and open
the two legs until a "click" is heard.
2. Install the foot stand by inserting the 2-foot stand into the housing & leg tube
until a "click" is heard. Pay attention to the direction of the left and right driving
part groups.
3. Assemble left & right seat frame when a "click" is heard. Unfold the backrest
and seat tube, tighten the two screws at each side (totally 4 screws).