Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• The LED charging indicator (M) lights up red
when the device is charging.
• Once charging is completed, the LED charging
indicator (M) will no longer light up and the
device will automatically stop charging.
• Unplug the charging cable from the device,
which is now ready for use.
• If the battery level is low, you will hear two
beeps every 10 seconds, indicating that the
battery needs to be recharged.
Note! Do not use the device in temperatures that
fall below 0 °C or exceed 40 °C (± 3 °C). The device
is equipped with a safety temperature control
chip and therefore does not work exceeding these
temperature ranges.
Powering the device ON/OFF:
• To power on the device, press the power On/Off
button (A) for ± 3 seconds.
• Once powered on you will hear a 'tone' , and the
LED indicator (L) flashes blue.
• To power off the device: press the power On/Off
button (A) for ± 3 seconds, you will hear a 'tone' .
Making a Bluetooth® connection (pairing):
• Power on the device, pressing the power On/
Off button (A) for ± 3 seconds. Once powered
on, a 'tone' will sound, and the LED indicator (L)
flashes blue, indicating it is in pairing mode.
• Keep the device and your mobile phone, tablet
or other Bluetooth® enabled appliance within
1 m (3 ft) of each other during the pairing
process.
• Make your mobile phone, tablet or other
Bluetooth® enabled appliance search for
compatible Bluetooth® devices. (Make sure the
Bluetooth® function is turned on).
• When your mobile phone, tablet or Bluetooth®
enabled appliance finds the device, select "LB-
SV-KMIC01" from the list of found devices.
• A 'tone' will sound and the LED indicator (L) will
flash slowly, indicating successful pairing.
• If a paired Bluetooth® enabled device is in range,
the device will connect automatically when the
device is in Bluetooth® mode.
4
NOTE!
If you would like to connect the device to another
Bluetooth® enabled device, you must first
disconnect it from the active paired Bluetooth®
enabled device. Go to your appliance Bluetooth®
settings, select "LB-SV-KMIC01", and select
"disconnect" or "unpair". You can also simply
switch off the Bluetooth® function. When the
device has been unpaired and/or does not have
an active paired Bluetooth® connection, repeat the
pairing process with the (new) Bluetooth® enabled
appliance you want to connect to the device.
NOTE!
If the device is not used for 5 minutes, it will
automatically disconnect the active Bluetooth®
connection to save the battery.
Karaoke
You can download several "karaoke apps" to sing
along with your favourite songs, from your Play
store or App store. Follow the instructions/settings
of the installed app. Please note that the device
needs to be in Bluetooth® mode, and connected
your mobile phone, tablet or other Bluetooth®
enabled appliance.
Microphone volume
You can increase the microphone volume, by
sliding the microphone volume button (H) up.
You can decrease the microphone volume, by
sliding the microphone volume button (H) down.
Remix (echo)
You can change the voice effect, by adding echo.
You can increase the voice effect, by sliding the
remix button (I) up.
You can decrease the voice effect, by sliding the
remix button (I) down.
Voice change effect
You can change the voice effect.
Press the voice button (G) for ± 2 seconds, until
you hear a beep. Each beep will change from: child
voice => lady's voice => man's voice => monster
voice => normal voice.
EN
Werbung
