MD799 / 50314
PLEASE READ THE MANUAL BEFORE YOUR FIRST USE. KEEP THIS MANUAL SAFE FOR
Materials : ABS, PVC
15 LED warm white on each tree
1. Press the 4 spikes firmly into the ground.
2. Press the button. The LEDs will light up. The TIMER mode "8 hours ON / 16 hours OFF" is now
activated.
3. Press the button again. If the LEDs were previously off (Timer OFF), they will light up. If the LEDs
were on, they will remain on continuously.
4. Press the button a third time to turn the LEDs off.
•
Do not touch the lamp, the switch with wet hands.
•
The lamp should be placed in a dry place.
•
Do not attempt to open the lamp to repair it. The electrical part can only be repaired by a
qualified electrician or a specialized workshop.
•
The lamp is not a toy. Keep the lamp out of the reach of children and pets.
•
A blow, a shock, or a fall, even from a low height, can damage it.
WARNING: You should not dispose of this device with your household waste. A selective
collection system for this type of product is implemented by your local authorities. Please
contact your local authorities to find out how and where collection takes place. These
restrictions apply because electrical and electronic devices contain dangerous substances that
have harmful effects on the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The
symbol shows a waste container crossed out with an X symbol.
Imported by EML – trading name Prodis, 1 rue de Rome 93110 Rosny-sous-Bois-France/ Made in
PRC
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD, Germany
FirTree Stakes LED
Instruction Manual
FUTURE REFERENCE!
PRODUCT FEATURES
Fir tree size : Dia.30 x H 45 cm
Wire length :
Between the battery box and the tree : 150cm
Between each tree : 50 cm
BATTERY INSTALLATION
Required batteries: 3 x 1.5V AA (not included)
OPERATION
WARNINGS
English