Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Protection of the screws and bolts
Steel is a material that exposed to external elements (humidity, salty winds) will naturally
oxidise. To prevent the appearance of rust, our steel furniture is delivered original with an
Epoxy treatment. However this layer gradually disappears under the effect of external
elements and must be renewed regularly. For this, apply an anti-rust aerosol at least once at
the beginning and end of the season (available in hardware shops or DIY shops). Increase
the treatment frequency every 3 months for furniture exposed to salty sea winds.
The screws and bolts must also be the subject of such a treatment.
If the rust appears despite all that, it can easily be treated and removed with the usual
products such as white vinegar or citric acid. A cloth soaked with car polish can also allow
you to remove the rust spots. Finish with an anti-rust spray to protect the furniture, to apply
regularly.
Repairing the synthetic resin
Synthetic resin is a supple but hardwearing synthetic material. During its life, a strand may be
deformed, even flayed. There is no risk of this graze from spreading. Use a hairdryer ten or
so centimetres away to heat the strand to soften it and put it back in place (do not apply the
hairdryer to the strand itself).
Werbung
