LEGRAND In One Galea Life Bedienungsanleitung Seite 11

Troubleshooting
Problem
The Learn indicator light comes on for
5 seconds.
The Learn indicator light comes on for
10 seconds.
The Learn indicator light no longer
blinks during learning
The programmed function button
does not work.
When the scenario is saved, the
Learn indicator lights of certain
receivers do not go out
* Example of element causing interference: electronic transformer, switch mode power supply, ...
( )
Cause
Learning is impossible.
The number is memorised
transmitters is greater than 32
The learning mode closes after 10
minutes. (with no action)
After pressing the Learn button once,
function key learning must be done
within the following minute
Poor communication between
products
11
Solution
Install compatible products.
Delete the unused scenarios.
Restart the learning.
Restart the learning.
Check the cabling (connection).
Look for a possible interference
device * .
( )
Insulate with a filter.