Herunterladen Diese Seite drucken

Elektro-Automatik Schrank Cabinet Bedienungsanleitung Seite 3

Werbung

DE
Technische Daten
• Typ: EA 15U
• Abm. (BxHxT): 60 cm x ca. 95 cm x 100 cm
• Ausführung: mit Türen, auf Rollen
• AC-Anschluß: L1+L2+L3+N+PE
• AC-Versorgung: 230 V (L-N) / 400 V (L-L)
• AC-Anschlußstrom: max. 57 A
• Gewicht: ca. 167 kg (voll bestückt)
• DC-Eingang: 60 V / 720 A / 30 kW
Konfiguration
• Rollen (4 Stück, davon 2 feststellbar)
• Bestückung: 2x PSB 9080-360 3U
• NA-Schutz (ENS 02) installiert
• Not-Aus-Kreis installiert mit
» 1x Not-Aus-Schalter (Pilz, oben auf Schrank)
» 1x Schraubanschluß für ext. Kontakt
» 2x Türkontakt (Hintertür)
Installation
Wichtige Hinweise
• Verändern Sie nicht die Netzeingangs-Verdrahtung
bezüglich Leitungslänge, Absicherung und Quer-
schnitt!
• Der Netzanschluß muß extern abgesichert werden!
Schrank
Der Schrank wird auf Rollen geliefert. Diese dienen
zum Transport bzw. Ortsveränderung des Schrankes.
Während des Betriebes des Schrankes muß aus Si-
cherheitsgründen sichergestellt sein, die Rollen unter
dem Schrank fixiert sind, da sonst der Schrank beginnen
könnte unkontrolliert zu Rollen bzw. umzukippen.
Wichtige Hinweise
• Der Schrank darf nur auf horizontalen Flächen
aufgestellt und betrieben werden.
• Der Schrank muß gegen Wegrollen gesichert sein,
neben der Fixierung der vorderen Rollen notfalls
durch weitere Maßnahmen
Installationsanleitung / Installation guide
09114666
Technical specifications
• Type: EA 15U
• Dim (WxHxD): 60 cm x ca. 95 cm x 100 cm
• Model: with rear and front doors, on casters
• AC input connection: L1+L2+L3+N+PE
• AC input voltage: 230 V (L-N) / 400 V (L-L)
• AC current: max. 57 A
• Weight: approx. 167 kg (fully equipped)
• DC input: 60 V / 720 A / 30 kW
Configuration
• Casters (4 pieces of which 2 can be locked)
• Equipped with: 2x PSB 9080-360 3U
• Grid protection unit (ENS 02) installed
• Emergency off circuit installed with
» 1x Emergency off switch (on top of cabinet)
» 1x Screw terminal for external contact
» 2x Door contact (rear door)
Installation
Important notes
• Do not modify the internal wiring, especially not
regarding cross section and cable length!
• The AC supply has to be fused externally!
Cabinet
The cabinet is delivered with casters. The casters are
allowed to be used while transporting/moving of the
cabinet. During operation it must be ensured that the
casters under the cabinet are fixed for safety reasons in
order to avoid the cabinet from rolling off or tipping over.
Important notes
• The cabinet must only be positioned and operated
on horizontal ground
• The cabinet must be secured against rolling off,
either by locking the casters or removing them
Datum: 06.12.2018
EN
3

Werbung

loading

Verwandte Produkte für Elektro-Automatik Schrank Cabinet