Cisco Systems Linksys WMP54GR Kurzanleitung Seite 8

B
Select the wireless mode you
want to use. Then, enter the
SSID for your network.
Infrastructure Mode - Use this
mode if the Adapter will
connect to a wireless router or
access point.
Ad-Hoc Mode - Use this mode
if the Adapter will directly
connect to another wireless
device.
SSID - Enter the name of your
wireless network.
Click Next.
C
If you chose Infrastructure
Mode, go to Step D. If you
chose Ad-Hoc Mode, the
Ad-Hoc Mode Settings screen
will appear. Select your
channel and network mode
settings.
Channel - Select the correct
channel for your network.
Network Mode - Select Mixed
Mode if you want both
Wireless-B and Wireless-G
devices in the network. Select
G-Only Mode if you do not
want any Wireless-B devices in
the network.
Click Next.
8
All manuals and user guides at all-guides.com
B
C