Technical Details - KBS GROUP 1000 Bedienungs- Und Montageanleitung

Risk of Fire
Keep combustible materials such as furniture, papers, clothes and
curtains at least 1.8m from the front of the heater and away from
the sides and rear. If the lamp is to be used outside, we
recommend that a waterproof or indoor socket is used.
Your replacement lamp
It is very important that your replacement lamp is exactly the same as the one
it was supplied with. Failure to fit the exact same type could cause the heater
to fail or even become dangerous especially when used in an outdoor
environment. Please contact KBS Produktions- und Handels GmbH to
purchase your replacement lamp and state the model number of the heater
you wish to fit the lamp to.
Handling the replacement lamp
Your new lamp should not be handled with bare hands.
Remove finger marks with a soft cloth and methylated spirits or
alcohol. Finger marks will burn into quartz causing premature
lamp failure.
Also note the heater outer casing can reach high temperatures.
Following information is only for EU-member states
The use of this symbol indicates that this product may not be
treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of
this product, please contact your local council, your household
waste disposal service or the shop where you purchased the
product.

Technical details

Model Voltage / Frequency
1000 220-240V / 50Hz
1500 220-240V / 50Hz
Power Lamp
1.000 watts KBS IR-lamp
1x1.000 watts
1.500 watts KBS IR-lamp
1x1.500 watts
Protection
class
IPX4
IPX4
11