VIOMI V2 Max Benutzerhandbuch Seite 5

Ba eries and Charging
• Do not use any third-party ba ery, charger, or charging dock. Use
only with <NLD120200W1U4> supply unit.
• The appliance must be disconnected from the supply mains when
removing the ba ery.
• This appliance contains ba eries that are only replaceable by skilled
persons.
• Do not place the charging dock near a heat source, such as a radiator.
• Do not wipe any part of the vacuum-mop with a wet cloth or other liquid.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or qualified persons in order to avoid a hazard.
• Do not improperly dispose of old ba eries. Before discarding the
vacuum-mop, make sure the vacuum-mop is unplugged and the
ba ery must be removed and disposed of in an environmentally safe
manner.
• Make sure the vacuum-mop is turned off when being transported
and kept in its original packaging if possible.
• If the vacuum-mop will not be used for an extended period, fully
charge it, then turn it off and store it in a cool, dry place. Recharge the
vacuum-mop at least once a month to prevent ba ery damage.
This product's laser radar meets the IEC 60825-1:2014 Standard for
Class 1 laser product safety and does not produce laser radiation
hazardous to the human body.
Electrical Diagram
Charging Board
Ba ery
Charging Port
Dust Compartment
Sensor Board
Water Reservoir
Sensor
Mop Sensor
02
Power
Power Adapter
Plug
Le Wheel
Speed Sensor
Main Brush
Motor
Radar
Control Board Side Brush
Motor
Fan
Water Pump
Motor
Right Wheel
Speed Sensor
Le Wheel
Motor
Right Wheel
Motor