Werbung
Verfügbare Sprachen
Verfügbare Sprachen
REF:
GAENNAXV01
SKU: ENNAXNAT
Modifications to the appearance linked to the use of the product and natural wear:
-
Softening of foams, sagging of leather, fabrics and microfibres
-
Wear, tearing and dirtying of the covers
-
Natural change in colours, varnish and woodwork over time
MANUFACTURING TOLERANCES
The dimensions, samples of fabric, leather and wood finishes in your possession are solely provided for the purposes of information. We cannot ensure a similarity of colours and
appearance on deliveries with respect to samples.
For the matching of fabric, leather or wood finishes, we cannot ensure the same colour base. Any difference in appearance cannot be the subject of a complaint.
GETTING A GOOD AND LONG LIFE OUT OF YOUR PRODUCT REQUIRES COMPLIANCE WITH A FEW SIMPLE AND COMMON-SENSE RULES SUCH AS
-
Not leaning/sitting on the parts of the product that are not intended for this purpose and not leaning/sitting abruptly by allowing yourself to fall.
-
Not moving the product by pulling on the front.
-
Not exposing the product to the sun, the moon and any excessive source of light and heat.
-
Avoiding excessively humid atmospheres: the coverings and/or the structures can then expand/deteriorate excessively.
-
Not unsuitably handling the accessories of the products
-
Ensure as much as possible that all the seats on the product are used equivalently in order to maintain homogeneous comfort as a whole.
In use, the product will soften thus giving its maximum comfort. It is normal for modifications due to use of the product to appear over time.
PRECAUTIONS FOR PROLONGED USE
-
Observe the maintenance precautions indicated in this manual
-
Furniture fabric requires regular care because it is constantly exposed to dust and dirt.
-
Do not wait for the covering to become very dirty before cleaning it.
-
Regular dusting with a vacuum cleaner in particular (equipped with an armchair brush) is recommended.
IN CASE OF A STAIN
-
Acting quickly is a determining factor in order to obtain good results. Sponge wet stains using an absorbent cloth by blotting it.
-
Never apply a cleaning product directly on a product covering; instead soak a white and clean cloth or a sponge.
-
Always first test the action of the product on a non-visible part of the seat and then after verification, remove the stain with the soaked cloth by rubbing from the edge to the
middle.
-
Do not use abrasive cleaning products to clean your product.
WARRANTY
Page 24
Werbung
