Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting up the product
Putting pictures into the frames
Cut the images to the correct size (57 x 82 mm).
Press the lever on the cover in the direction of the file to open the cover.
Place the picture with the front facing the glass.
Close the cover.
Inserting the battery
Using the correct polarity, insert a 1.5 V AA R6/LR6 battery into the battery
compartment on the back of the product.
Setting the time
Use the dial on the back of the product to set the time.
Replacing the batteries
Remove the battery without damaging it.
Using the correct polarity, insert a 1.5 V AA R6/LR6 battery into the battery
compartment on the back of the product.
Cleaning instructions
Improper cleaning can damage the product. Do not immerse the product in water or
other liquids. Avoid any aggressive cleaning agents, brushes with metal or nylon bristles,
or any sharp or metallic cleaning objects such as knives, hard spatulas and the like.
These can damage the surface. Clean the product with a soft, dry, lint-free cloth, such as
that used for cleaning glasses lenses.
Storage
If the product is not used for a long time, remove the battery, clean and store the product
away from sunlight in a dry, cool place, preferably in the original packaging.
- 17 -
Disposal
The product and packaging material are recyclable. Please dispose of them
separately for better waste management. For options for disposing of the used
product, please contact your town council or city administration.
Check the labelling on the packaging material when separating
waste – they are marked with abbreviations (a) and numbers
(b) with the following meaning:
1-7: Plastics
20-22: Paper and cardboard
80-98: Composites
Disposal of the electrical device
The symbol with the crossed-out dustbin means that electrical and
electronic equipment must not be disposed of together with household
waste. Consumers are legally obliged to dispose of electrical and
electronic equipment at the end of their life separately from unsorted
municipal waste. This is to ensure environmentally friendly and resource-
saving recycling. Batteries and rechargeable batteries that are not an integral part
of the electrical or electronic device and can be removed without being destroyed,
must be separated from the device before handing it in at a collection point for
designated disposal. The same applies to lightbulbs that can be removed from the
device without being destroying. Owners of electrical and electronic equipment who
are private individuals can hand them in at the collection points operated by the
public waste disposal agencies or at the collection points set up by manufacturers or
distributors. Returning used devices is free of charge. This free take-back obligation
applies both to purchases in shops and to home deliveries. The place of
performance of the obligation to take back is the same as the place of performance
of the delivery. Transport costs may not be charged for returned equipment. In
general, distributors have the obligation to ensure the free return of used devices by
providing suitable return facilities within a reasonable distance. Consumers have the
option to return an old device free of charge to a distributor who is obliged to take it
back if they purchase an equivalent new device with essentially the same function.
This option also exists for deliveries to a private household. In the case of distance
selling retailers, the option of free collection when purchasing a new appliance is
limited to heat exchangers, display screen devices, and large appliances that have
at least one outer edge with a length of more than 50 cm. The distributor must ask
the consumer at the time of concluding the sales contract about the intention to return
the product. Apart from that, consumers can hand in up to three old devices of one
type free of charge at a distributor's collection point without this being linked to the
purchase of a new device. However, the edge lengths of the respective devices must
not exceed 25 cm.
- 18 -
Werbung
