Teuco SAUNA J Bedienungsanleitung Seite 10

EN
AT THIS MOMENT, IT IS NECESSARY TO POUR THE SCALE
REMOVER LIQUID INTO THE FILLER CAP.
Prepare the solution as shown on the scale remover liquid .
Pour the scale remover in the special tray until the circuit is
completely full (according to the sauna version, the scale
remover required will vary from 500cc to 800cc) .
The start of the scale removal process is shown by a
reduction in the flashing frequency of the " " button (1 flash
every two seconds) .
Remember to replace the cap of the decalcifier's topping up
tube .
The scale removal process takes about two hours and for all
this time, the dial on the " " button will continue to flash at
low frequency .
The cycle should be run preferably during night hours, or at
least when the sauna is not in use .
The cabin can still be used with the shower or multifunctions
while the descaling cycle is running .
SAUNA J
10