Aukey LT-ST21 Bedienungsanleitung Seite 5

All manuals and user guides at all-guides.com
Using the Lamp
1. Switch on the lamp on/off switch on the bottom of the base to turn
on the lamp (LED indicator will be soft yellow when switched on) and
place the lamp down where you want to use it
2. Tap anywhere on the touch-sensitive control surface (silver area) to
light up the lamp. Increase brightness by tapping a second and third
time. There are three brightness levels
3. Tap a fourth time to switch off the light
Using Lamp Color Mode
1. Long touch the panel about 3 seconds (whether the lamp is lit or not)
to turn on automatic color cycling mode
2. Tap once to pause on any color. Tap once again to continue automatic
color cycling
3. Long touch the panel about 3 seconds to turn off the light
Product Care & Use
• Don't repair, dismantle, or modify the product
• Keep away from liquids and extreme heat
• Don't use on conductive surfaces (such as metal tables), which may
interfere with touch control
• Disconnect power cable and switch off lamp on/off switch before
cleaning or when not in use for a long time
• Clean the lamp only with a soft dry cloth
- 03 -