Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
deliver reminding tone. (In general case, no password is needed; for special mode, output pas-
sword, input "0000");
4. The successfully paired device can be automatically connected for the next switch-on.
Note:
-
Whithin 10s after entering Bluetooth mode, the Bluetooth will automatically seek for the device and
pair for connection; after 10s, it needs to be connected manually.
pair for connection; after 10s, it needs to be connected manually.
pair for connection; after 10s, it needs to be connected manually.
-
Long press key
COMANDS AVAILABLE IN BLUETOOTH MODE
-
Press and hold the key
for a few seconds to go to the previous song;
-
Press the button
HANDS-FREE MODE FOR CALLS
If connected to a telephone, you will hear a beep when a call is received.
-
Press the key
end the
call;
-
Press and hold the key
-
Double click on the button
TWS PAIRING METHODS
1. Power On the Bluetooth speaker at the same time, then the LED indicator quick flashing;
Power On the Bluetooth speaker at the same time, then the LED indicator quick flashing;
2. Double-click on the Power button
At this time, the device is in the pairing mode;
3. When it sound again, they are get pairing successfully. Meanwhile the main device the LED
14
(4) and key
(6) Bluetooth headset can be disconnected/reconnected.
(4) for a few seconds to go to the next song, keep the key
(5) to pause, press it again to resume
(5) once to open the call and activate the hands-free function, press it again to
(5)
to reject the call.
(5) to recall the last number.
(2) of any device, and the device wil issue a prompt sound.
playback.
(6) pressed
Werbung
