Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Even when the automatic system is activated,
it is possible to trigger a manual backwash any
time by pressing the
How to change
backwash intervals
To change backwash intervals, press the
to get to the main menu.
Select „Mode" by means of the
firm with the
key.
Then,
select
„Automatic"
the
key and confirm again with the
key.
Display
„Valve does not
open"
„Valve does not
close "
„Low battery"
8
key.
key
key and con-
by
means
Displayed messages
Cause
- Valve cannot be opened.
- Faulty motor.
- Valve cannot be closed.
- Batteries are low.
Use the
or
hours (max. 52 weeks, max. 30 days, max. 24
hours).
Confirm any change by pressing the
Differential pressure cable
To connect the automatic backwash system to a
differential pressure switch, plug the cable into
the corresponding socket.
of
Technical specifications
Type of protection:
Service temperature:
Battery:
Power:
When using the power pack:
Power supply:
Accessory power pack:
Solution
- Confirm with OK and try to trigger a manu-
al backwash (cf. Manual backwash)
- Contact your installer or the SYR service.
- Contact your installer or the SYR service.
- Replace the batteries (4 x LR06).
printed in Germany - 9.2380.17
key to set the weeks, days and
IP21
10°C - 60°C
4 x LR06
max. 2,5W
230V / 50Hz
2316.00.905
1428 - Subject to alteration
key.
Werbung
