Scope of delivery
Waves Style waving iron
Heat protection glove
Comb
2 x hair clips
Instruction manual
Technical specifications
Rated power: 85 watts
Temperature range: from 80 to 230 degrees
Settings: in 5 degree steps
Diameter of heating elements: 25 mm
Weight: 480 grams
Product size: 34.5 x 8,8 x 2,7 cm
Application of the Waves Style wave iron
•
Please always use the heat protection glove.
•
The hair must be dry to use the Waves Style waving iron.
•
Always treat the hair with a heat protection product before
use.
•
Start the heating process of the wave iron by pressing the
on/off button.
•
Select a desired temperature on the appliance. Set it with
the +/- buttons, the temperature is shown in the display.
Wait a while until the desired temperature is reached. If
the temperature is reduced, wait a while until the applian-
ce has cooled down.
•
There is a fold-out metal foot on the underside of the
Waves Style wave iron to support it. Never place it hot on
a surface without it.
•
Please start with a lower setting and then increase it if the
result seems insufficient.
•
The Waves Style wave iron has 31 temperature settings
that can be adjusted in 5 degree increments from 80
degrees to 230 degrees.
•
Now take a strand of hair about 6 to 8 cm wide and fix the
hair next to it with the hair clips so that it is protected.
•
Stretch the strand of hair, open the heating elements with
the lever on the handle and place the strand between the
heating elements.
Wait a few seconds until the waves are fixed and then open
the heating elements again directly. Please style carefully and
180