Atlantis BXSW13N Bedienungsanleitung Seite 12

Switching on and o
1. When the watch is o , charge or long press the side button to start the smartwatch.
2. When the watch is on, select the power o interface from the drop-down menu under
"Settings" and click the check to turn o .
3. You can also long press the side button and click on the "check" to turn o .
How to remove the strap - cleaning
1. To remove the watch band, move the watch band lug switch to the arrow position to
remove the watch band from the watch.
2. To attach the watch strap, hold the switch on the left side retracted and place the right
end in the hole designed for it. Turn the switch to the position of the arrow and install it.
Fine adjust the position until it is installed.
How to charge TUBE
• Charge the product for more than two hours before use. Align and adjust the charging
port to the metal contacts of the charging base until the charging power indicator
appears on the wristband display.
• Use the special charging cable that comes with the package to charge. Make sure the
charging port is dry before you start charging.
• To charge the device, connect the charging cable to the power adapter or USB port of
your computer or other suitable device.
• Do not use the power adapter with an output higher than 5V 1A to charge, otherwise it
may burn the circuit and thus damage the charging system.
Initial configuration
Click here to download the VFIT App from Google Play or App Store:
1. Open the Bluetooth settings of your device and turn on Bluetooth.
2. Download the VFit App.
3. Follow the instructions in the app and create a profile.