Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Following actions will take place when an announcement will be made:
1)
All selected zones will be transmitted to the Matrix system (R2) or Relay units (ARU) ,
and the selected zones will be activated.
2)
The chime tone will be played. During this step, the Orange "Enable" LED will flash.
3)
When the chime tone is finished, the Orange "Enable" LED will stop flashing, the "Low"
LED will illuminate and the microphone will be switched ON. From this moment, the
announcement can begin. The best way to make an announcement is to speak through
the microphone from a distance of ± 5 cm, with a voice level which makes the
Green LED (Level = GOOD) illuminate.
4)
To terminate the announcement, just release the "Push to Talk" button.
5)
From this moment, you can change the selected zones for the next announcement.
The APM101 has just one "Push to Talk" button, which can be used to make general
announcements (To all zones). It's also possible make a specific configuration of the zones which
have to be announced.
17
Werbung
Kapitel
Inhaltsverzeichnis
