EN
2.
Assembly steps
STEP 1 -
Armrest Assembly
1. Slide the le� and right armrest into the brackets of the seat.
2. Press each armrest down as far as it will go.
C
12
D
A
ATTENTION
Ensure the two connec�ons on each armrest
are all inserted onto the seat �ghtly.
STEP 2 -
Backrest Assembly
1. Align the brackets of backrest at the clips of seat-back.
2. Push firmly the brackets into the seat-back. Listen for a "click" on each side to ensure
the backrest is locked in properly.
EN
ATTENTION
Be careful not to crush or pinch the wires
when installing the backrest.
13