Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This product is intended for lighting purposes only and may:
-
operate only with a voltage of 220-240V / 50-60Hz
-
only be connected in accordance with protection class I (one)
-
be used only when mounted on a solid, level, non-tilting surface
-
only be used on normal or non-flammable surfaces
-
not to be subjected to heavy mechanical stress or heavy soiling.
Before installation/commissioning
-
The LED floodlight must only be used unpacked.
-
Carefully remove the LED floodlight from its packaging.
-
Make sure that the LED floodlight has not been damaged during transport before putting it into service.
-
The light cannot be operated if there is any damage to the electrical parts. Repairs may only be carried out by
a qualified electrician.
-
Keep packaging materials out of the reach of children and pets. Risk of asphyxiation!
Installation/Commissioning
-
Make sure that the surface is suitable for permanently and reliably supporting the weight of the LED
projector.
-
Do not bend the cables; ensure that the cables are not subjected to tension or twisting forces. Protect all cables
and insulation from damage.
-
Recheck that the connection is correct.
-
Disconnect the entire product from the mains before cleaning or servicing.
Werbung
