INNOCIGS CUBOID Bedienungsanleitung Seite 46

INNOCIGS CUBOID MINI BATTERY – OPERATING & CHANGING THE MODES
2. Installing new Atomizer Coils
If an atomizer coil is exchanged with a coil of a different resistance, it is important to reset the
"Base Resistance" of the coil. This is the resistance of the coil at room temperature.
After installation of the new atomizer coil, press the fire button on the battery without a clearomizer
attached to initiate a reset. After connecting the clearomizer to the battery,
"New Coil Right, Coil Same Left" will appear on the screen. Confirm with the right button that
a new coil has been installed.
If you see this message in other instances - especially when you reinstall the same coil which is still
warm from recent use - press the left button, so that the "base resistance" is not reset.
Always remember to adjust the operating mode of the Coil used to ensure proper function of the device.
44