Locking And Unlocking The Coil Resistance In Vt Mode - Innocigs Cuboid Bedienungsanleitung

INNOCIGS CUBOID MINI BATTERY – OPERATING & CHANGING THE MODES

1. Locking and Unlocking the Coil Resistance in VT Mode

Press the fire button three times to enter the menu. Press the "down" button twice so the second
line displaying the resistance flashes on the display. Press the "up" button to lock or unlock the
resistance of the atomizer. When the "lock" symbol is shown on the display, the resistance is locked.
Note
a) Only lock the resistance when the coil is at room temperature. This will ensure that the correct
"base resistance" of the atomizer coil is locked. The temperature control will remain correct, as long
as the coil is not replaced. If the resistance is locked, you can remove your clearomizer whether the
atomizer coils is still hot or cold.
b) Before changing to another atomizer coil, unlock the resistance. Otherwise, the VT system will
not work properly. In "Resistance Unlock" mode, please make sure that the coil is changed at room
temperature to ensure temperature accuracy.
43