Wellue VisualBeat Bedienungsanleitung Seite 8

Using the Monitor
3.
3.1 Before Use
Activation
The monitor must be activated by charging it before the
first use.
Note: The monitor will not work without being activated.
Charging
1. Connect the main unit with the power/data
cable, as shown in the picture.
2. Connect the other end of the cable to the
power source of 5V output/USB
connector, like a laptop or power adapter.
Note:
Clean and dry the charging contacts after use if
⚫
you sweat while using the device. Wipe the
contacts with a damp cloth, then wipe them dry.
If it fails to charge, clean the charging contacts and
⚫
wipe them dry.
Setting the Date and Time
Date and time on the monitor are automatically
synchronized each time it is connected to the ViHealth
app.
For connecting the app, scan the QR code in 3.1 to
check the quick guide for ViHealth.
Note: To record the data with the proper date and time,
we recommend connecting the monitor to the ViHealth
app before initial use.
6