mamibot W120-T Benutzerhandbuch Seite 11

Connect to Power Supply
Plug in W120-T
Important Notes:
Be sure your W120-T is always connected to AC power supply while working. Don't use it if
the backup battery is lack of power, use it after full charging. Take off your W120-T asap, if
the power supply is cur or unplugged accidently.
Operate W120-T
On/Off Button
1. Power On/Off button – Press for 2 seconds to turn on/off your W120-T.
2. Press the On/Off button once to start or stop the W120-T when it is placed on
window.
Start Your W120-T
1. Press the On/Off button for 2 seconds to turn on your W120.
2. Place your W120-T on glass, press again the On/Off button to start.
3. You can also start it from your remote control "START" button.
Caution: Before starting, make sure the edge of W120-T is 8 cm or more away from
window frames or corners.
Use of Remote Control
Automatically "Z"
Type Cleaning
Automatically "N"
Type Cleaning
Manual Move UP
Manual Move Down
11