Werbung
Verfügbare Sprachen
Verfügbare Sprachen
As shown in Pic 2 below, when the AC mains at the socket end is disconnected, the bypass
output inside the product stops working, the product switches to a bidirectional inverter
circuit within 10ms, and the circuit outputs supply power to the electrical appliance to
ensure that the electrical appliance is uninterrupted and works normally during the
process.
Connection of Solar Panels
Under the condition of light, this product can be connected to the solar panel and getting
charged. The charging power is determined according to the conditions of light and
weather.
In this charging mode, we support solar panel input within 500W, and the input voltage
cannot exceed 50V, otherwise the product abnormality caused by it will not be covered by
the warranty.
We recommend the following two charging schemes:
Bypass circuit
Battery charging
Pic 1
Bypass circuit
Bidirectional interter
circuit
Pic 2
12
Load/Equipment
Load/Equipment
Werbung
