Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications; Use Of The Device - Livoo Tea307 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für TEA307:
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
Merci de lire les instructions ci-dessous avec attention avant d'utiliser l'appareil et de les conserver pour
un usage ultérieur.
Une mauvaise utilisation de l'appareil peut l'endommager ou blesser l'utilisateur. Assurez-vous que vous
utilisez l'appareil dans le but pour lequel il est conçu. Nous refusons toutes responsabilités quant aux
dégâts (aux dommages et intérêts) dus à une utilisation incorrecte ou une mauvaise manipulation.
Never use a damaged product. Do not attempt to repair a damaged product.
This device is for indoor use only.
WARNING: To charge your external battery, use only the USB cable provided.
Do not use any other cable than the one supplied with the external battery to charge it.
Please remove the USB charging cable when the battery is fully charged.
In case of malfunction, please take your external battery to a specialist.
No parts can be repaired or replaced by the user.
Keep your battery away from rain, water or moisture.
Do not expose your battery to high heat sources. Do not dispose of it in fire.
Keep your external battery out of the reach of children.
Recharge the device every 3 months if not used for a long time. Do not charge and discharge the
device at the same time.
Turn off the device and unplug it after each use and before cleaning it.
If you use an adapter (not supplied), use only an adapter with a power supply that matches the
marking on the device.

Technical Specifications

Capacity: 10 000 mAh
Allows to charge 5 devices simultaneously
Max charging power: 10 W
Integrated solar panel: 5.5 V / 1.43 W input
3 cable outputs: Type-C, micro-USB, Lightining
2 USB output ports: 5 V / 2 A
3 Charging ports: Type-C, micro USB, USB
Drawing of the device
Figure 1
1
LED torch
2
USB output
3
Micro USB- load of the device
4
Type C - load of the device
5
USB output
6
LED torch
Figure 2
1
Solar panel
2
Led indicator for remaining power

Use of the device

Before using your external battery for the first time, you should fully charge it, preferably using an AC
adapter (not included).
Briefly press the ON/OFF button once to switch on the device and activate the LED charge indicator
(displayed in 25% steps from 25 to 100%). Briefly press this button twice to switch the LEDs on and off.
Press and hold this button to turn off the device.
Recharge your battery when only 25% of the charge capacity remains.
7
Power switch
8
Solar panel
9
USB input- load of the device
10
Micro USB output
11
Type C output
12
Lightening output
www.livoo.fr
Inhaltsverzeichnis
loading

Inhaltsverzeichnis