Duonix Bike Scan Bedienungsanleitung Seite 18

Only for motorcycles with 12V board tension
Please observe the correct procedure for the diagnosis on the vehicle. 1. Connect the
diagnostic device to the diagnostic connector. 2. Turn on the ignition. 3. Select the
desired diagnosis function from the main menu and confirm with ENTER.
1. Leave the operating mode in the diagnostic device and return to the main menu. 2. Switch
off the ignition and disconnect the connecting cable to the vehicle.
All manuals and user guides at all-guides.com
Start Diagnostics
Terminate diagnostics
Button
 Confirmation button / as next step
 Exit / Back menu
 High
 Down
-2-