Venen Engel 6 MOBIL Bedienungsanleitung Seite 16

STEP 1: BEFORE USE
CONNECT THE HOSE SET
AND CUFFS
Connect the tubes to the connectors on
the cuffs. Make sure the longest tube
goes to the foot air chamber.
Note: We recommend that you do not
detach the connectors after setup.
Note: To keep the device clean, we recommend wearing thin jogging pants or leggings. Keep pockets empty. Zip the cuffs
completely closed to avoid sudden opening. Be careful not to kink the tubing during use.
CONNECT THE TUBE SET AND THE
CONTROL UNIT
There are two clips on the side of the
multi-plug. Depress the clips then insert
the multi-plug into the control unit.
Note: Please insert the small fittings of
the multi-plug into the openings found
above the air outlets.
CONNECT THE POWER SUPPLY TO
THE CONTROL UNIT
Connect the power supply to both the
control unit and an outlet to ensure
power.
16