Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
MANUAL OF INSTRUCTIONS
ENGINE STAND INSTRUCTIONS
(900KG/2000LBS)
This stand made of strongly resistant steel
allows a rotation of 360º in 6 positions, also
allowing a simple an easy transportation and
storagement.
PRECAUTION
1.
Do not exceed the maximum capacity.
2.
faces.
3.
Do not roll the stand with the engine han-
cles that may impede the pass through.
4.
Do not ever work under the engine while
hanging from the stand.
5.
Ensure the engine is as stable as the
stand.
6.
Examine the engine periodically to ensure
7.
Failing on following these indications may
result in personal and/or material damage.
ATENTION!
1.
Do not overcharge the stand
2.
Max. Capacity: 900KGS
3.
Ensure the operating zone is obsta-
cle-free.
4.
Do not roll over any crack, cord or any
ASSEMBLING INSTRUCTIONS
1.
Assembles the front legs (2) to the frame
base (1) using bolts (16).
2.
Insert hair pins through the frame pins for
safety.
3.
Attach the main support post (3) to the fra-
me base using bolts (15),washers (13) and
buts (14).
4.
Attach support straps (4) to top of main su-
-
pport post using bolts, washers and nuts.
5.
Connect support straps to frame base
using bolts, washers and nuts.
-
6.
Slide the head of the stand (5) into the top
of the main support post, align holes and
after that slide the locking pin(11) and the
handle as well (10).
7.
Mount the arms (6) to the head of the stand
using 4 bolts (7), washers (8), and bolts (9)
as it's shown. Arms can be adjusted to the
engine.
Nº
1
Frame base
2
Front leg
3
Main support post
4
Support straps
5
Head of stand
6
Arms
7
Bolt, M16x70
8
Washers
9
Bolt M16
10
Handle
11
Locking pin
12
Bolt M14x100
13
Washer Ø14
14
Bolt M14
15
Bolt M14 x 85
16
Bolt M12 x 25
other obstacle on the way because it may
cause and accident.
5.
Always control/move the support from the
rear side, for safety.
· 3 ·
DESCRIPTION
QTY.
1
2
1
2
1
4
4
4
4
1
1
1
5
5
4
4
Werbung
