Worx WX200 Originalbetriebsanleitung Seite 9

AddITIONAL SAFETY
INSTRUCTIONS FOR YOUR
SCREWdRIVER
1. hold power tool by insulated
gripping surfaces, when performing
an operation where the fastener
may contact hidden wiring or its
own cord. Fasteners contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock.
2. Hold your drywall screwdriver firmly in
both hands.
3. Do not use damaged or worn driver bits.
4. Use clamps or a vice to hold workpiece, if
possible.
DOuBlE iNSulATiON
The tool is double insulated. This means that
all the external metal parts are electrically
insulated from the main power supply. This is
done by placing insulation barriers between
the electrical and mechanical components
making it unnecessary for the tool to be
grounded.
imPOrTANT NOTE
Be sure the power supply is the same as the
voltage given on the rating plate. The tool is
fitted with a two-core cable and plug.
Remove the power plug from socket before
carrying out any adjustment or servicing.
drywall screwdriver
SYMBOLS
To reduce the risk of injury, user
must read instruction manual.
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
9
EN