OPTIONAL: HANGING INSTRUCTIONS
ATTENTION: Hang the product high enough so children can't reach it!
1.
Lay the prdouct on its side and pull the hanging tabs all the way out
(see diagram STEP 1)
2. Open the clip by pushing it against the tab. Once the clip is open wide enough,
slide the clip into the tab. (STEP 2) Repeat on the other side.
3. Hang in desired location. (STEP 3)
CLEANING AND MAINTENANCE
CAUTION – RISK OF ELECTROSHOCK. NEVER TOUCH THE METAL GRID
WITH YOUR BARE HANDS.
The cleaning frequency depends on the intensity of use. Check the tray of the device
at least once a week. Clean more often if necessary.
The light source may only be replaced by qualified service personnel. Other parts are
not replaceable. Dispose of the device at the end of its service life.
STEP 1
PULL OUT
EACH TAB
STEP 3
STEP 2
EN