Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY
OPERATING SAFELY
In general
-
Use extra care when loading or unloading the
machine into a trailer or truck.
-
Slow down and use caution when making turns
and crossing roads and sidewalks. Stop tines if
not aerating.
-
Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
-
Stop operation if someone approaches.
-
Keep all guards in place when operating.
-
Do not turn sharply. Use extreme caution when
pulling machine towards you.
-
Use counter-weight(s) or wheel sheights when
suggested int he operator's manual.
-
Never leave a running machine unattended.
Always release drive and stop engine before
leaving the operator's position.
Starting
-
Start only according to instructions in this manual
or on the machine.
-
Before attempting to start the engine, make sure:
- the traction clutch is disengaged.
-
When starting the engine, make sure hands and
feet are clear of the blades.
-
Do not change engine governor settings or
overspeed the engine. Operating the engine
at excessive speed can increase the hazard of
personal injury.
4
Interrupting operation
-
Before leaving the operator's position:
- Park on level ground.
- Disengage the traction clutch.
- Shut off the engine.
-
raise the tine:
- when not aerating;
- for transport;
- when crossing surfaces other than grass.
-
Disengage the traction clutch, stop the engine, :
- before refueling;
-
Disengage the traction clutch, stop the engine,
allow the tines to come to a complete stop, and
disconnect the spark plug wire:
- before clearing blockages;
- before checking, cleaning or working on the
machine;
- beforehaving maintenance or repairs
performed;
- after striking a foreign object. inspect the
machine for damage and have repairs made
before restarting;
- if the machine begins to vibrate abnormally:
shut off machine immediately. inspect
and have repairs made as needed before
restarting;
- except for repairs or adjustments as specifically
noted, such as for carburetor adjustment,
where the engine must be running. Keep
hands and feet clear of moving parts in these
circumstances.
-
reduce the throttle setting during engine shut-
down and, if the engine is provided with a shut-
off valve, turn the fuel off at the conclusion of
operation.
Lawnaire
IV & V
Werbung
Kapitel
Inhaltsverzeichnis
