SATA AE5602T Bedienungsanleitung Seite 90

Chapter X
Fault
1. Indicators on computer and display
don't work
2. Display doesn't work
3. Not be able to print or print bad
4. Computer can not find camera
5. Indicator on flash board doesn^t work a. no connecting 12V power
6. Camera can not capture target plate a. dirt on target plate
90
AE5602T
Fault and Solution
Possible Cause
a. no connecting power
b. no switching on
c. cable broken
a. display switch off
b. cable connecting computer and
display has problem.
c. display broken
a. printer no switch on
b. no paper in the printer
c. printer not installed well
d. no ink in printer
a. camera not installed well
b. cable connecting computer and
camera has problem.
c. camera doesn't work
b. wire connecting flash board and
powrer has problem.
c. 12V power broken
d. transmitting tub broken
b. obstacle between camera and target
plate.
c. camera doesn't work.
d. flash board doesn't work.
中文
EN DE RU KO
Solution
check power socket, fuse and cable
connection
a. switch on display
b. check connection, if cable broken,
replace new one
c. contact service person
a. switch on printer
b. load paper
c. reinstall driver or printer
d. replace ink box
a. reinstall driver of camera.
b. check connection, if cable broken,
replace new one
c. contact service person to replace
camera.
a. switch on 12 V power
b. check and replace wire
c. replace 12V power
d. replace flash board
a. clean target plate by cleaning tools.
b. clear obstacle.
c. solve the problem according 4.
d. solve the problem according 5.
PT JA ES