Scooterpac Antares 3/4 Gebrauchsanweisung Seite 17

Step 5. N.B. refer to page 15 before attempting this step.
Loosen the quick release clamps (A) on the mounting bracket and loosen the allen
key bolts on the plastic clamps (B). Now attach the brackets to the armrests using
the bolts you removed earlier or the 45mm bolts supplied if required. Ensure any
Nyloc nuts have the bolt protruding by at least 2mm.
The brackets must be as near to level as possible and the allen bolts on the plastic
sleeves tightened.
B
Tip: the mounting bracket ends can be orientated up or down, whichever fits
your scooter best.
A
14