Werbung
Verfügbare Sprachen
Verfügbare Sprachen
instructions
Product description
Intended use:
These ceiling-mounted monkey bars are designed for swinging from one bar to another or for similar
exercises. They must not be used for any other purpose. Misuse of any kind will compromise safety and
render the warranty void.
Dimensions: 200×70×31 cm
Weight: approx. 26 kg
Maximum load: 120 kg
Warnings!
• For the safety of all users, any maintenance work should be carried out by qualified professionals.
• Please ensure adequate fall protection is provided.
• Do not overload this product.
• Protect the equipment from damp conditions.
• Ensure this product is used indoors only.
• Store in a closed room at a temperature of no less than 15°C and humidity of no more than 65%.
Modifications:
Any modifications to this product will compromise safety and render the warranty void.
Assembly
Tools required: power drill
Number of people required: 1
Time required: 20 minutes
Ceiling mounting:
Before assembling the product, please check the ceiling it will be attached to. It should be a solid load-
bearing ceiling (solid brick, lime sandstone, reinforced concrete or wooden beams), which can safely
withstand the tensile forces of the fixings. Take care not to drill holes into any structurally load-bearing
parts of the building.
If you are not sure the ceiling will withstand these forces, please consult a structural engineer.
Fixings:
Use fixings to suit the structure and condition of your ceiling. They should be able to withstand a tensile
load of at least 2,000 kN.
Parts list:
No.
Quantity
1
1
2
6
for Art.-Nr. 349 9708
Description
Monkey bars
Ceiling mounts
6
Werbung
