MP glass GIULIA Montageanleitung Seite 22

EN TECHNICAL SPECIFICATIONS - ENVIRONMENTAL PROTECTION
Nominal voltage
220-240V~
Nominal frequency
50/60 Hz
Nominal output power
GIULIA 60 / H60 X L60 X P17 CM / MAX.3,23W / LED 2,5W
GIULIA 80 / H60 X L 80 X P17 CM / MAX.4,42W / LED 3,5W
Lamp
LED 6500°K - IRC80
Protection class
CLASS II
IP Protection rating
IP 44
WARNING!
This product bears a symbol relating to the disposal of waste of electrical
and electronic products. This means that this product must not be
disposed of with household waste, but must be deposited in a recovery
system in accordance with EU Directive 2012/19/EU. It means that this
product must be recycled or dismantled in order to reduce its impact
on the environment. The electrical equipment contains hazardous substances which
may pose a risk to the environment and human health.
42
42
MISCELLANEOUS AFTERSALES SERVICE, REPAIRS, GUARANTEE, ETC.
Have this appliance repaired by a qualified professional.
This electrical product complies with the safety standards in force. Repairs must only
be carried out by qualified technicians using original spare parts. Any failure to follow
these instructions can be particularly dangerous to users.
If necessary, contact the after-sales service of the store where you purchased this
product.
Information for the external connection box:
• Link the electricity network by respecting the following color code:
- Link the brown thread (phase) with the red wire(common theme) of the network
- Link the blue thread (neutral) with the blue thread of the network
- Link the green and yellow thread (earth)((ground)) with the green and yellow
thread of the network
• Attach the mirror to the wall.
• Turn the electricity supply back on and switch on the luminaire. Your luminaire is
now ready to be used.
Use a double-insulated 3G 1,5 mm² silicone rubber power cable . The operating
temperature of the cable must be above 130°C. The external diameter of the cable
must be over 9 mm to ensure optimum insulation.
43
43
EN