Kruger & Matz KM2013 Bedienungsanleitung Seite 13

Owner's manual
OPERATION
• Press the power button to turn the radio on or off.
• Press the MODE button to change the playback mode.
• Press the adjustment knob to open the settings. Use the knob to change the settings.
After 3 seconds of inactivity, the radio will return to the last playback mode.
Setting the clock
1. Turn on the radio.
2. Press and hold the clock button. The hour indicator will start flashing. Use the knob to
set the time.
3. Press the knob or clock button to change to minutes setting.
4. Use the dial to set the minutes.
5. Press and hold the clock button to confirm the time settings, or wait 5 seconds.
Radio
• Radio is the default mode when you first turn it on.
• To automatically search for radio stations, press and hold the band change button.
• To change the frequency automatically, press the previous or next song button. The
frequency change will begin. Press one of the buttons again to stop the frequency
EN
change.
• To set the frequency manually, press and hold the next or previous song button. The
message "HAND" will appear on the display. Use the next and previous track buttons to
set the frequency. After 3 seconds of inactivity, the radio will display the "AUTO" message,
and pressing the next or previous song button will automatically change the frequency.
• To assign a set frequency to one of the lower six buttons, press and hold the selected
program button.
24
• A separate set of saved radio stations can be assigned to each FM band (FM1, FM2, FM3).
• To change the band, press the BAND button. Each press will switch to another band.
Playing from a microSD card or USB drive
When you connect a USB drive (e.g. a flash drive) or a microSD card (the card locks in the
socket, insert it with pins facing the display), the radio will automatically switch to the
correct mode. If this does not happen, switch the mode manually using the MODE button.
• Press the BAND button to display information about the song being played. Press and
hold the BAND button, then use the rotary knob to skip to the selected song.
• Press the pause button to pause or resume the song.
• Press the INT mode button to activate it. In this mode, the songs will play for the first 10
seconds.
• Press the repeat button to change the repeating mode: repeating a single song (RPT
ONE), repeating songs from a folder (RPT DIR), repeating all songs (RPT ALL). If there is
an RPT message on the display, one of the first two modes is active (the default
repetition mode is repeating all songs and is not indicated by an RPT message).
• Press the random play button to enable or disable random play mode. When you turn on
the mode, an RDM message will appear on the display.
Playing from AUX
1. Connect the 3.5 mm plug of the external device to the AUX socket.
2. Change the mode to AUX IN using the MODE button.
3. Use the external device to control the playback of the music.
Owner's manual
EN
25