Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dry ironing
Always turn off the steam switch and turn the steam adjuster
knob to "Min" position before use dry ironing function.
Insert the plug into a suitable power outlet. Select the required
temperature, the iron indicator light starts to illuminate. When
the indicator lamp of iron goes off,you can start dry ironing.
Adjust the temperature control knob according to the hint on the
tag of cloth. To iron from low temperature cloth if there's variety
clothes.
Refill function:
This appliance has a refill function. When the water in water tank
becomes too less to work, the indicator lamp of no water (9) will
illuminate. You are able to refill the water tank during use. No
need to disconnect the power supply while refilling the water
tank.
CARE OF YOUR STEAM STATION
• Before attempting any maintenance operation, be sure to
always disconnect the appliance from the mains.
• Normal tap water can be used. However, as hard water by its
nature contains limestone, which may cause a build-up of lime
scale in the tank, in hard water areas we recommend the use
of Vinegar Solution (75%water+25%vinegar) to clean the tank.
• To clean the body of the appliance, simply use a moist cloth.
Do not use solvents or detergents which may harm the body
material.
• We decline liability for any damage or accident derived from
any use of the Steam Station which is not in conformity with
the instructions contained in this booklet.
Werbung
Inhaltsverzeichnis
