Renkforce 2793805 Bedienungsanleitung Seite 4

7.2 Connect power adaptor
1. Connect one end of the cable to the power input on the product.
2. Connect the other end of the cable to a suitable power supply.
7.3 Connect to computer
1. Connect one end of the cable to the USB-C® port on the product.
2. Connect the other end of the cable to a USB port on your computer.
8 Operation
8.1 Read/write to connected drive
Important:
Risk of data loss!
– Do not move or switch the product off during data transfer. For more information see section:
LED status indicators [} 4]
Preconditions:
a
Connected drives are formatted and partitioned before use. Refer to the operating system instruc-
tions for information about how to do this
1. Press the power button to switch the power ON. Wait a few moments for each drive in the enclos-
ure to appear.
à Each drive will appear as a separate drive letter.
2. Drag and drop files to the desired drive(s).
3. When data transfers are complete, press the power button to switch the power OFF.
8.2 LED status indicators
Status
RED flashing
BLUE ON
RED/BLUE flashing
9 Troubleshooting
Problem
A drive is not recognized by your com-
puter
Slower transfer speeds than expected.
The red status light is flashing
10 Cleaning
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They dam-
age the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Switch the product off.
2. Let the product cool down to ambient temperature.
3. Clean the product with a dry, fibre-free cloth.
4
Secure a compatible drive to the tray
using the included screws
1. Slide the tray into an available slot.
2. Gently push the tray all the way in
to secure the SATA connection.
3. Close the door when finished.
Description
Disc error
Power ON
Data transfer in progress
Suggested solution
■
Check the capacity does not exceed the limitations of
the operating system.
■
Check the drive is correctly formatted for your operating
system.
■
Check that the USB drive on your computer supports
data transfer rates of up to 5 Gbps.
■
Copy large files to one drive at a time.
■
The drive is damaged or contains errors. Check the
drive and repair or replace if needed.
11 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU
market. This symbol indicates that this device should not be disposed of as unsorted muni-
cipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it sep-
arately from unsorted municipal waste. Spent batteries and accumulators, which are not
enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive
manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of
waste. Conrad provides the following return options free of charge (more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in coun-
tries outside of Germany.
12 Technical data
12.1 Product
Input ...................................................... 12 V/DC, 6.5 A
Interface................................................. USB-C® 3.1 (Gen 1) 5 Gbps
Supported drives ................................... 6.35 cm (2.5") / 8.89 cm (3.5")
Supported capacity................................ 4x 16 TB (64 TB max.)
System support...................................... Windows®, Mac, Linux
Operating conditions.............................. 0 to +40 °C, 30 - 65 % RH (non-condensing)
Storage conditions................................. -5 to +40 °C, 20 - 70 % RH (non-condensing)
Dimensions (W x H x D) ........................ 136 x 252 x 138 mm
Weight ................................................... 2.45 kg
12.2 Power adapter
Input ..................................................... 100 - 240 V/AC, 50/60 Hz, 1.5 A
Output ................................................... 12 V/DC, 6.5 A, 78 W
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2793805_V1_0523_dh_mh_en 9007200114027787-2 I2/O1 en
SATA HDD / SSD