Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Please keep this manual on file for future reference. First check contents of the box to ensure
all parts a re included and undamaged.
Operation
This product is equipped with an Auto Shut-off Digital pressure gauge. The digital gauge can be
used to monitor air pressure when inflating your desired objects,and can automatically shut off
once pre-set desired pressure is reached.
•
Allow air compressor to cool for 10 minutes after 10 minutes of continuous operation.
•
After using, disconnect the 12 V adaptor from the power outlet and store the product in
original packaging
•
To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter
connector rather than cord.
•
Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
Pressure Pre-set
•
The pre-set pressure is factory set at 45 PSI when manufactured.
Inflating a car tire and bicycle tire
1.
Turn on the car engine and roll out the 12 V cord and connect the 12 V adaptor to the outlet.
2.
Screw the thread connector onto tire's valve stem.
3.
Press the "set" button for 3 seconds, and the gauge will display "45 PSI." If you want to
change pressure, press the "
4.
When the desired pressure is reached, the gauge display will return to 0.0 PSI after 3 seconds.
The air compressor is now ready for use.
5.
Press the "I" button to turn on the air compressor. When the pressure reaches the pre-set
pressure, the unit will turn off automatically.
6.
Remove the thread connector from the tire and disconnect the 12 V car adaptor.
Note: To avoid over-inflation of tires, please check the recommended car tire pressure in the
vehicle's owner's manual. For bicycle tires, please check the tire marking.
74DD8NVY-AmazonBasics-Portable Air Compressor-IM-V01 (EU).indb 5
" button to increase. Press the "
" button to decrease.
5
11/14/17 5:06 P
Werbung
Inhaltsverzeichnis
