Walimex Pro Powerblock Gebrauchsanleitung Seite 25

NOTE
Compare the local power network with the connected load of the device.
If the values differ, please contact info@foto-walser.de
+49 8432 9489-0
The Powerblock starts charging right away.
LED Charge lights up red. LEDs of the status display flash.
Once the Powerblock is fully charged, the LED charging display lights up
green.
Charging process
Plug the 12V DC cable into the connecting socket of the Powerblock, and
connect it to the socket in your car, e.g., the cigarette lighter.
The Powerblock starts charging.
LED Charge lights up red. LEDs of the status display flash.
Once the Powerblock is fully charged, the LED charging display lights up
green.
5.2. Connect flash
A WARNING
Please pay attention to the safety notes.
Plug connecting cable (not included in delivery) into connecting socket of
Powerblock and connect to your compact flash.
Switch on Powerblock using the on/off switch.
with the 12V DC car cable
device to the Powerblock
walimeSpro
Your Inspiration.
or tel.
Your Chance.
25