Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This high-definition digital motion video recording
device is designed for vehicle data recording, pho-
to-shooting, outdoor sports, home security, deep-water
probing, etc., allowing the user to film at anytime and
anywhere.
Product features:
✓ A water-resistant casing that allows you to film up to
30 meters under water.
✓ High-definition LTPS LCD screen.
✓ Easily replaceable detachable battery.
✓ Digital video recording, photo shooting, video dis-
play, and audio recording.
✓ 120º HD wide-angle lens.
✓ Web camera.
✓ Support storage cards up to 64GB.
✓ Multiple video recording formats.
✓ Motion detection and cyclic recording.
SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all ins-
tructions. Failure to follow the warnings and instruc-
tions listed below may result in electric shock, fire and/
or serious injury.
• Do not fall or crash the product.
• Do not expose the unit to strong magnetic objects,
such as magnet and electrical motor and avoid
strong radio waves. Strong magnetic fields may
cause the product to breakdown or damage the
images and sounds.
• Never leave the products exposed to high tempe-
ratures and direct sunlight.
• You must use branded Micro SD cards. Neutral
cards are not guaranteed to work normally.
• Do not place the Micro SD card near strong mag-
netic objects to avoid data loss.
• In case of overheating, smoke, or unpleasant
smell in the process of charging, unplug your devi-
ce immediately to prevent fire hazard.
• While it is charging, keep the product out of chil-
dren's reach. Power line may cause children acci-
dental suffocation or electric shock.
• Keep the device in cool, dry and dust-proof places.
Installing and taking out the battery
NOTE! The battery is already installed on the camera
by default.
1. Pull out the cover.
2. Take out the battery.
3. Replace it.
NOTE! You need to look at the positive and negative
poles of the battery before installing it.
Charging
• Charging can be done by either connecting came-
ra to the computer or power adaptor with the USB
cable supplied.
• The camera can be charged on the vehicle by con-
necting it to the car charger.
• Charging the camera can be done even when it's
powered off.
Once it is connected to the power supply for charging,
the action camera will automatically turn on, and the
charging and operation indicators will light up:
• If the camera is on and being charged, the opera-
tion indicator will light up in blue and the charging
indicator in red.
• If the camera is turned off while charging, the blue
operation indicator light will turn off and the red
charging indicator light will remain on.
Switching On/Off
To turn the camera on and off, press and hold the
power switch/mode button for about 3-5 seconds.
Mode switching
You can switch between video recording/photo shoo-
ting/playback/settings menu by shortly pressing the
power switch/mode button:
• After the machine is turned on, the default is "re-
cording mode".
• Press "mode" X1 to switch to "photo shooting
mode".
• Press "mode" X2 to switch to view the photos and
videos taken.
• Press "mode" X3 to set up the switch to system
settings.
The symbol for each mode will be displayed on the
upper left corner of the screen:
Recording mode
Photo shooting mode
Photo/Video playback mode
System setting
· 6 ·
REF. 53865
Werbung
