Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
General
Connection
Install oil filter
This appliance should be connected to the mains power by a registered
fitter, who knows and applies the correct safety specifications.
Electrical connection
This appliance is manufactured in Class I; this means the device must
be grounded.
Check whether the power of the electrical mains corresponds to the
power on the identification plate on the appliance.
Before connecting to the electrical mains, check whether the power
socket is grounded.
The device is equipped with a plug. When installing the appliance,
remember that this plug must remain accessible.
Note!
If you want to make a fixed connection, make sure a multi-polar switch
with a contact separation of at least 3 mm is fitted in the supply line.
y Remove the transport cover
y Install oil filter
EN 11
Werbung
