McLaren BALANCE BIKE Bedienungsanleitung Seite 4

1. Assemble the seat.
Unlock the clamp under the seat. Pull the seat up or down according to the child's height.
Lock the clamp under the seat.
The seat tube height must
be adjusted based on the
kid's height, the best status
is that the kid's feet can
totally touch the ground,
meanwhile, his/her knees
are slightly bent.
2. Assemble the Handlebar.
Remove the black plastic cover at the bottom of the stem. Use the Allen key (T1) to
loosen the screws under the handlebar counterclockwise, adjust the handlebar direction
to be perpendicular to the wheels, and then tighten the screws clockwise.
5
Warning:
1. This product is not suitable for children under 3 years;
2. A reminder that the toy should be used with caution since skill is required to avoid
falls or collisions causing injury to the user or third parties;
3. This product must be used under adult's supervision;
4. Make sure your kid is equipped with a helmet and pads before using this product;
5. Check the condition of the product before using it.
Notice:
-1- Please inform your kid how to use the product;
-2- The product should be assembled by an adult, please don't use before it's fully
assembled;
-3- Keep your kid away before the McLaren Balance Bike is fully assembled;
-4- Do not use the product in public places, on sandy or rocky roads, slopes, or hills.
Please avoid riding in dangerous places such as stairs, ponds, swimming pools, etc.
-5- Please don't use spare parts other than the manufacturer's recommendations;
-6- Please check the product regularly to ensure that all components are not loose;
-7- It is strictly forbidden for other children to push or pull the bike during riding;
-8- Please do not immerse the bicycle in water. Moving parts should be lubricated
regularly. If you need professional repair, please call your local dealer.
Any questions during assembly or usage, please feel free to contact
customer@eastlim.com
EN
6