Modecom MC-MSF15 Kurzanleitung Seite 2

MC-MSFI
rvlultirnedia Speakers
Introduction.
MODECOM MC-MSF15 were designed for
those seeking high quality multimedia ex
perience. The set is working in 2.1 system,
which means it has two satellite speaker
and one subwoofer unit. In such system
satellite speakers are responsible for re-
production of high and mid tones, whereas
subwoofer is dedicated
powerful low tones.
Such system is great solution for multime
dia use, such as computer games or mov
ies playback. Of course it can handle music
with great quality as well.
All of the speakers are enclosed in cabi-
nets made Of MDF boards that assure per-
fect acoustics for each of the speaker.
To enhance the comfort
equipped with volume
control knobs on the side
speaker.
Specification.
Satellite speakers dimensions:
x 160 x 102 mm
Subwoofer dimensions:
x 225 mm
Satellite drivers:
Subwoofer driver:
Power RMS: 2.5W
Frequency response: 85Hz-20kHz
Signal input: 2 x RCA
Signal input cable length: 150 cm
Satellite speaker connection cable
length: 150 cm
Power: AC 230V @ 50 Hz - 90mA
Net weight: 3,6 kg
Gross weight: 4,2 kg
www.
to the deep and
of use, set is
control and tone
of the satellite
110
155 x 254
3"
4"
x 2+ low
modecom
S
Installation
Before you begin the installation
sure that the main power switch is in OFF
position and all control knobs are in the
maximum left position (rotate it counter-
clockwise).
1. Place the speakers such that the satel-
lite speakers are on your right and left side.
To achieve best stereo
satellite speakers should form equilateral
triangle (each satellite
same distance from the listeners
Preferably try to put the speakers in such
manner that the satellite speakers are on
the same height as your ears.
2. Connect the signal cable to the signal
input (L and R) on the back of subwoofer
and appropriate output port of your sound
source (for example Output Of your PC's
soundcard).
3. Connect the satellite speaker with con
trol knobs to the "WIRE
socket at the back of subwoofer.
4. Connect the RCA cable
ellite to the "OUTPUT"
of subwoofer.
5. Connect the power plug to the mains
socket.
6. Switch main power switch to ON posi-
tion.
7. Start playing sound using your connect-
ed sound source.
8. Using the volume knob set up desired
volume level.
9. You can adjust the played sound tones
using the Bass and Treble knobs to suit
your personal preferences.
. eu
make
effect listener and
should be in the
ears).
CONTROLLER"
of the other sat
socket at the back