Minix NEO Z100-0dB Bedienungsanleitung Seite 5

Overview
Power LED - The LED glows blue when NEO Z100-0dB is on.
Power Bu�on - To power on the NEO Z100-0dB, press and hold the
power bu�on for 1-2 seconds un�l the power LED glows. To power off
the NEO Z100-0dB, press and hold the power bu�on for 8 seconds.
3.5mm Audio Input/Output Combo Jack - Connect an external audio
input/output device such as microphone.
2.5G RJ-45 Ethernet Port - Connect an Ethernet cable for wired
internet access up to 2.5Gbps.
DC 12V Power-in Jack - Connect the included 12V power adapter.
NEO Z100-0dB requires approx. 1A to operate, however, the included
power adapter provides 3A to ensure support for other external
devices a�ached to NEO Z100-0dB, such as an external hard drive.