Zhermack FURNACE DM 30 Bedienungsanleitung Seite 139

MAINTENANCE AND USE MANUAL
This Use and Maintenance Manual provides information on the utilisation, installation and
maintenance of the DM series ovens (versions furnace DM30, furnace DM40, furnace DM50; furnace
DM4R; furnace DM1; furnace DM1G), manufactured by Zhermack.
• The equipment must be used in accordance with the instructions in this manual: it is therefore
recommended that you read it carefully prior to installation and start-up. Make sure that you read the
entire manual and pay particular attention to messages written in bold type or items highlighted by
boxes and/or symbols: the symbols are designed to highlight situations involving danger or requiring
caution (see paragraph 1.2).
• Observance of standards and regulations shown in this manual will ensure that the equipment is used
properly and that maintenance work is carried out safely.
• This Use and Maintenance Manual is an integral part of the equipment: it should therefore be kept
together with the equipment so that it can be consulted as and when necessary (keep the booklet in
a secure dry place away from sunlight, atmospheric agents, etc.). It must be available for consultation
throughout the working life of the equipment even when the equipment is sold or finally dismantled.
• It is recommended that you keep this manual constantly updated by integrating any amendments,
additions or modifications made by the Manufacturer. Any notes or comments should be made on the
blank pages at the rear of the booklet (see Appendices: Notes).
• Use the manual properly so that it is not damaged in any way.
• Do not remove, tear or write on any part of the pages.
• If the manual is lost or damaged and its contents become illegible you can request a replacement copy
from the Manufacturer.
The purpose of this Use and Maintenance Manual is to provide users with information on how to
operate the equipment properly. The manual contains all the information needed to use the device as
intended: in particular the manual includes instructions and information on the
following:
• correct installation of the equipment;
• Detailed description of how the equipment works and its components;
• Initial start-up;
• Scheduled maintenance;
• Basic Safety and Accident Prevention info.
This manual contains nine chapters each of which covers a specific argument.
The appendices at the rear of the manual are a useful complement to these chapters.
FURNACE DM
All manuals and user guides at all-guides.com
EN
CHAPTER 1: INTRODUCTION
HOW TO READ AND USE THE MANUAL
1.1
139 of 272