Connect IT CES-2020-WH Benutzerhandbuch Seite 6

POWER CONSUMPTION METER
CES-2020-WH
 Price per kWh setting
EN
1. Plug the meter into a power outlet.
2. Use the COST button to switch to the Price per kWh display.
5
3. Press and hold the COST button for 5 seconds to set the price per kWh. The first digit on the display will start flashing.
Press the UP/DOWN button to set the desired value.
4. Press the FUNC button to shift to the second, third and fourth digit. Press the UP/DOWN button again to set the desired
value.
5. Press the COST button to confirm and save the set value.
1
Note:

Data deletion: Press the RESET button to clear all data.
2
5
CONNECT IT®️ is a registered trade mark
3
6
R202310-IM-CES2020WH
USER MANUAL
4
7