Herunterladen Diese Seite drucken

Mobilex 302030 Montage- Und Gebrauchsanleitung Seite 10

Vorschau ausblenden Andere Handbücher für 302030:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Assembly
The handle must be mounted in the holes using the 2 screws provided. The screws are fitted from the underside of the
board up into the handle. This can be done with a screwdriver or a coin. The handle is then mounted on the bath
board. Now mount the legs. This is done by unscrewing the screw from the leg. The screw is mounted from the top of
the board and the leg from the bottom, the leg can be tightened with the hands.
Warning! Before using the board, it is important that the board is mounted in such a way that it cannot move from
one side of the bathtub to the other. At the same time, it is important that the surface of the bath board is supported
securely by the sides of the bath.
Assembly instructions
The legs are mounted with screws
Accessories
No accessories are available for the product.
Transport recommendations
There are no special considerations to take when transporting the bath mat other than general caution.
4. Technical Data:
Bath board
Outer dimensions
For bathtubs with
Weight
Max. load
Product label
The product label is located on the backside of the board
MOBILEX A/S
Grønlandsvej 5
DK - 8660 Skanderborg
Tel: +45 87 93 22 20
www.mobilex.dk
Image of the product label
Rev. 15.02.22
All manuals and user guides at all-guides.com
The screw is mounted from the
top of the board and tightened
from underneath
31,8 x 70,5 x 18,6 cm
Innenbreite 41 - 64 cm
2,69 kg
200 kg
Shower board
REF
302030
≦200 kg
2022.01.17
MD
SN
0001
10 - 16
The handle is tightened with 2
screws from underneath up
through the board into the handle.
302030
Overview icon meaning
UM-302030-MULTI-15022022.odt

Werbung

loading