Pico Technology PicoConnect 442 Benutzerhandbuch Seite 6

PicoConnect 442 Differential Probe User's Guide
2.5 Care of the product
The product contains no user-serviceable parts. Repair, servicing and calibration
require specialized test equipment and must only be performed by Pico Technology.
There may be a charge for these services unless covered by the Pico one-year
warranty.
WARNING
To prevent injury or death, do not use the product or its accessories if they
appear to be damaged in any way, and stop use immediately if you are
concerned by any abnormal operations.
WARNING
To prevent compromise of the protection offered, avoid mechanical stress or
tight bend radii for all CAT III rated accessories and the probe casing.
WARNING
To prevent injury or death, do not tamper with or disassemble the probe or
its accessories. Internal damage will compromise the protection offered.
2.6 Cleaning
When cleaning the product, use a soft cloth and a solution of mild soap or detergent
in water.
WARNING
To prevent injury or death, do not allow liquids to enter the casing, as this
will compromise the electronics or insulation inside. Do not immerse the
probe in any liquid.
WARNING
To prevent injury or death, always ensure the probe is thoroughly dry after
cleaning and before connecting it to the oscilloscope or device under test.
4 Copyright © 2017 Pico Technology Ltd. All rights reserved. DO283-2